Step 1
Remove the 8 purchase screws (S6) from the rear plate to separate the rear plate and the wood cabinet.
Step 2
Unplug the connector speaker wire from the PCB amp assembly.
Step 3
Remove the 4 purchase screws (S5) from the rear plate to separate the rear plate and cover.
Step 4
Remove the power/volume knob from the rear plate.
Step 5
Remove the 4 purchase screws (S2) and nuts (N1) to separate the rear plate and transformer assembly.
Step 6
Remove the 2 purchase screws (S3) from the bracket and the 2 purchase screws (S4) and nuts (N2) from the IC of STK4024 to separate the rear plate and Amp assembly.
Step 7
Remove the 4 purchase screws (S1) from the driver inside the wood cabinet to separate the wood cabinet and the driver.
